# Ring Your Team

> Ring this line is the call flow step that makes phones ring. Name the members, pick the order, set the ring time, and choose what happens if nobody answers

**Ring this line** is the step that makes phones ring. Every other step in a call flow decides which callers reach it and when. This page covers who it rings, in what order, how long for, and why a phone can stay silent.

## How to choose who rings

The step rings the members named in it, and nobody else.

<Steps>
  <Step title="Select the ring step">
    Open the designer and select the **Ring this line** step. Its settings open in the panel on the right.
  </Step>
  <Step title="Add the members who should ring">
    Under the member list, select **Add team members** and pick a teammate. Repeat for everyone who should ring on this step.
  </Step>
  <Step title="Save">
    While the list is empty, Save is blocked and the step reads "Add at least one member to ring".
  </Step>
</Steps>

<Warning>
  Having access to the line is not the same as being in the ring step. A teammate who is a member of the line but is not in this list never rings on it. That is the most common reason one person's phone stays silent while everyone else's rings.
</Warning>

## How to choose the ring order

| Order | What happens |
| --- | --- |
| **Simultaneous** | All selected members ring at the same time. The first to answer takes the call, and the others stop ringing. |
| **Cascade** | Members ring one by one, in the order you set. Each rings for the ring time before the next one is tried. |
| **Queue** | Callers wait in line, and available members are rung one at a time until someone answers. |

Order only means something in a cascade. There, each row can be dragged and carries its position number. A simultaneous ring reaches everyone at once and a queue reaches whoever is free first, so neither has an order to set.

## How long each person rings

One duration governs the whole step, and it means something different in each mode:

- **Simultaneous**: how long everyone rings together.
- **Cascade** and **queue**: how long each member rings before the next one is tried.

The dropdown offers 15, 20, 30, 45 and 60 seconds. Anything from 15 to 90 seconds is accepted, so a flow built earlier can carry another value. Below 15 or above 90, the save is blocked on that step.

<Note>
  Ring time is per step, not per call. A cascade of four members at 20 seconds each keeps a caller waiting up to 80 seconds before the **If missed** branch runs. Add up the whole path before you settle on a duration.
</Note>

## How to hold callers in a queue

A queue holds callers while your team is tried one member at a time. It adds two settings the other two orders do not have:

| Setting | What it does |
| --- | --- |
| Maximum waiting time | How long one caller waits before taking the **If missed** branch. From 30 seconds to 15 minutes. |
| Maximum callers in line | How many callers wait at the same time. From 1 to 25. A caller who arrives when the line is full goes straight to **If missed**. |

While they wait, callers hear the waiting music set on the line. That is a separate setting on the line, under **Waiting music**, and a call flow does not replace it.

## How to skip people who are already on a call

A toggle on the step rings only the members who are not already on a call, and skips the others. It is off by default, so a member who is mid-call still rings unless you turn it on.

## What happens when nobody answers

Every ring step has an **If missed** branch, and Allo does not let it stay empty. It runs when the ring time runs out, when everyone declines, and, in a queue, when the caller's wait runs out.

The usual destinations are **Voicemail**, **AI receptionist**, **Forward to a number**, or another **Ring this line** step.

## How to ring a second group after the first

To ring a second group when the first one misses, put another **Ring this line** step on the **If missed** branch. The first group rings, and if nobody answers, the second one does.

There is no separate groups mode, because a second step says the same thing and carries everything a step can carry: its own members, its own order, its own ring time, and its own **If missed** branch.

## Examples

> **Front desk first, then the whole shop**
>
> **Incoming call** → **Ring this line** (front desk, simultaneous, 20s)
>
> **If missed** → **Ring this line** (everyone, simultaneous, 30s) → **If missed** → **Voicemail**

> **Escalation**
>
> **Incoming call** → **Ring this line** (cascade: 1 Marie, 2 Karim, 3 Sophie, 20s each)
>
> **If missed** → **AI receptionist**

> **Busy line, callers wait instead of hitting voicemail**
>
> **Incoming call** → **Ring this line** (queue, 30s per member, callers wait up to 5 minutes, 10 in line)
>
> **If missed** → **Voicemail**

## Why a phone does not ring

Work down this list before looking at the device:

1. **The person is not in the ring step.** Open the step and check the member list.
2. **The order puts them last.** In a cascade, someone in third position only rings after two ring times have run out. The caller often gives up first.
3. **They were mid-call and the availability toggle is on.** Ring only the people who are free skips anyone already on a call.
4. **The call never reached the ring step.** A business hours step sends closed-hours calls elsewhere, a phone menu only rings on the key that points at the step, and a contact property step sends unknown callers down **No match**.
5. **The edits are not saved.** If the designer header shows **Unsaved**, callers are still on the previous version.

If the flow is right and the phone is still silent, the cause is on the device: notifications, Do Not Disturb, or the connection. See [call flow troubleshooting](/help/features/call-flows-troubleshooting) and [common issues](/help/support/common-issues).

## Related pages

<CardGroup cols={2}>
  <Card title="Call flows overview" icon="/media/allo-icons/Subnode.svg" href="/help/features/call-flows">
    Steps, saving and limits
  </Card>
  <Card title="Call flow troubleshooting" icon="/media/allo-icons/CircleQuestion.svg" href="/help/features/call-flows-troubleshooting">
    When a flow does not behave
  </Card>
  <Card title="Voicemail" icon="/media/allo-icons/Voicemail.svg" href="/help/features/voicemail">
    Where most If missed branches end
  </Card>
  <Card title="AI receptionist" icon="/media/allo-icons/AI.svg" href="/help/features/ai-receptionist">
    Let the AI answer instead of voicemail
  </Card>
</CardGroup>
